Vision
Automotive
DetectionClassification
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class
weld grading
/ The Challenge
Weld quality judged by eye varied by inspector and shift; loose and burnt welds escaped into assemblies.
/ What We Deployed
Per-weld classification grades quality and position in real time; anything but OK + Normal is rejected automatically.
/ The Results
- Every weld graded consistently
- Loose/burnt escapes stopped
- Manual weld checking removed
More in Automotive
Vision
Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control
Case study →
Vision
Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured
Case study →
Vision
Automotive
Thread Inspection System
Verifies presence of threads, holes, and slots on machined parts — rejection triggered if any feature is missing. Multi-brand parts on the same software.
Multi-brand one system
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll tell you whether it is reliably detectable, and show measured results on a trial where it is.