Vision
Automotive
Detection
Ejection & Gating Mark Inspection
Verifies ejection and gating marks on molded components are present in correct position and shape — missing or wrong marks flag manufacturing issues.
Early
mold warning
/ The Challenge
Wrong or missing mold marks indicated process problems and product mix-ups that surfaced only at the customer.
/ What We Deployed
Cameras verify mark position and shape per molded part, rejecting deviations and flagging mold issues early.
/ The Results
- Mark position verified per part
- Product mismatches prevented
- Mold problems flagged early
More in Automotive
Vision
Automotive
Black Glue Detection on Glass
Verifies black glue presence and continuity on black primer while the robot applies it — on gap detection the robot stops and the glass is reworked.
In-cycle robot control
Case study →
Vision
Automotive
Welding Quality Inspection — OK / Loose / Burnt
Classifies every weld as OK, Loose, or Burnt and verifies Normal vs Side position — a part passes only with OK quality in Normal position.
3-class weld grading
Case study →
Vision
Automotive
Weld Bead Measurement
Measures weld bead width, height, and continuity automatically against quality standards — objective weld measurement without manual gauges.
100% welds measured
Case study →
/ Get Started
Have a Similar Problem?
Send us your part and inspection challenge. We'll tell you whether it is reliably detectable, and show measured results on a trial where it is.